Description
Model | Currency Type | Voltage | Stacker Size | Bezel Type | Mounting Kit | Link to Item |
PA7-U1PB4-USD6 | USD | 110v-117v Ac | 400 Note Capacity | Standard | Yes | Link To Item |
PA7-U1PB5-USD6 | USD | 110v-117v Ac | 500 Note Capacity | Standard | Yes | Link To Item |
PA7-U1PB8-USD6 | USD | 110v-117v Ac | 800 Note Capacity | Standard | Yes | Link To Item |
PA7-U2PB4-USD6 | USD | 12v Dc | 400 Note Capacity | Standard | Yes | Link To Item |
PA7-U2PB5-USD6 | USD | 12v Dc | 500 Note Capacity | Standard | Yes | Link To Item |
PA7-U2PB8-USD6 | USD | 12v Dc | 800 Note Capacity | Standard | Yes | Link To Item |
ICT PA7 PA7-U1PB8-USD6 Bill Acceptor
The ICT PA7 bill acceptor is the first multi-protocol validator released by ICT.
The ability to work on multiple power sources with simply the change of a harness or dip-switch customization protocol selection make this unit a suitable choice for most redemption focused applications.
Bill Acceptor with Stacker
Built-in anti-stringing device
Accepts US $1, $5, $10, $20, $50, & $100 bills
High Acceptance rate: 96% or better
Bills can be inserted 4-ways
Fast validation time of 3 seconds (including bill stacking)
800 Bill capacity
Optic sensors read both sides of the bill for added security
Auto self-adjusting sensor system
Re-programmable via flash ROM module
Easily accessible dip switches
Standard bezel
Bill path is easily accessible by pressing two buttons
Easy installation and low maintenance
Handy 8-pin RJ-45 connector on the side of the bill validator for downloading programs and updating validation software
Comes standard as 110v AC
With Cover mounting plate
Can be used to replace the ICT N6 Bill Acceptor
2 Year Warranty Backed by ICT
Extra Information
Warranty Information
Two year warranty on all ICT PA7 Bill Validator